130HP 6 CYLINDER 4WD A/C CABIN TRACTOR WITH FEL 4IN1 BUCKET


130HP 4WD 6 Cylinder High Torque Engine. Tractor includes; Self Levelling Front End Loader 4 in1 Bucket, AG Tyres, Rear Weights, Clear Flat Platform, A/C Deluxe Cabin, Air Seat, Full lighting, Bluetooth Media System, USB Charger, 3 Rear Remotes, Hydraulic up & down 3 Point Linkage, 16F+8R Creeper Gearbox. Designed and Developed in Australia. Built tough, strong and heavy.

Engine: 4 Stroke, Fuel Injected, Diesel Engine, Vertical Bore
Engine Displacement: 6.49L
Number of Cylinders: 6
Engine Orientation: Longitudinal
Rated Engine Power: 130 HP (95.6/2200 kW/ PRM)
Air Filter: Dry type
Top Nominal Speed: 34.85Km/h
Fuel: Diesel
Fuel Tank Capacity: 160+50Litres
Fuel Consumption: 235 g/kWh
Cooling: Water Cooled
Transmission: 16F+8R
Clutch: 13inch Dual-action clutch with Metal Ceremic Frication Plate
Drive: Rear Wheel Drive with selectable 2WD / 4WD
Differential Lock
Differential: Closed, Planetary Reduction Bevel Gears
Differential Lock: Tooth Inlaid Type
Transfer Case: Helical Bevel Gears
Power Steering: Hydraulic Steering with Independent Pump
Suspension: Front beam rocking axle
Brakes: Oil-immersed Disc Hydraulic Brake System
Front Tyre Sizes: 12.4 -24
Rear Tyre Sizes: 16.9-34

Measurements & Weights
Tractor Weight with FEL&4 in 1 Bucket: 5,720 Kg
Wheelbase: 2,475 mm
Tractor Length with FEL&4 in 1 Bucket: 6,210 mm
Tractor Width: 2,260 mm
Tractor Height: 3,050 mm
Rear Track: 1,620 -2,020mm (Adjustable)
Front Track: 1,650 mm
Turning Circle: ?5m
Ground Clearance: 400mm
Rated Traction Force: 28kN
Colour: Blue
Power Take-Off: Spline: F35 Square, 6 teeth, Clockwise rotation Dual
Remotes: 3 groups of hydrauilc out-put valves
Hydraulic Output Flow: 70L/min
3-Point Linkage: Category 2, Hydraulic, min. 25kN Lifting Capacity
Starting: Electric
Electrical: 12volt
Seat: Adjustable suspension seat with seatbelt
Standard Extras: Steel Bonnet with pneumatic ram, Agricultural Tyres, Tow bar, Cabin with A/C & Heater, Flat Deck, Italy Faster brand quick coupler ½

Front End Loader

Loader Model: TZ10D
Rated Load Capacity: 1,000Kg Safe Working Load
Cubic Capacity: 0.6m3
Opening Angle: 74°
Bucket Width: 2,000mm
Bucket Depth: 590mm
Bucket Height: 630mm (without teeth)
Maximum Lift Height (at Pivot Pin): 3,130mm
Maximum Lift Height (Under Bucket): 2,450mm
Max. Digging Depth: 70mm
Dumping Angle: 90°
Roll-back Angle: 28°
No. of Teeth: 7
Self Levelling Bucket: Yes
Quick Release Bucket: Yes
Quick Release Loader: Yes